How to choose linear guide sealing? From catalogue A84–A96: grease fill volume and feed rate per size, oil fitting types and part codes, what the WW/WU/WZ/DU/DZ/BN seal codes mean, and how block length changes once accessories are fitted.
Grease fill volume scales with size: a single TR65 block takes 75 c.c. at 0.6 cm²/hr. Larger sizes must be topped up on schedule or life drops sharply.
| Size | Grease volume (c.c.) | Feed rate (cm²/hr) |
|---|---|---|
| TR / SR15 | 1.3 | 0.2 |
| TR / SR20 | 2.5 | 0.2 |
| TR / SR25 | 2.5 | 0.3 |
| TR / SR30 | 7 | 0.3 |
| TR / SR35 | 9 | 0.3 |
| TR / SR45 | 15.2 | 0.4 |
| TR55 | 40 | 0.5 |
| TR65 | 75 | 0.6 |
Append a two-letter code to the model for sealing and extended lubrication; each letter stands for one accessory in the kit.
| Code | Included accessories |
|---|---|
| WW | Reinforced end seal + lower seal + polymer oil reservoir |
| WU | Reinforced end + lower + upper seal + polymer oil reservoir |
| WZ | Reinforced double-end + lower + upper seal + polymer oil reservoir |
| DU | Reinforced end + lower + upper seal + polymer reservoir + metal wiper |
| DZ | Reinforced double-end + lower + upper seal + polymer reservoir + metal wiper |
| BN | Reinforced end seal + oil box |
Metal end caps, dust steel strips and other special items are available on request.
This is the practical one: fitting seals and an oil reservoir lengthens the block, eating into the space available. A TR45 standard N block is 112.3 mm but becomes 121.8 mm with a full DZ kit — 9.5 mm longer. Always check the mounting space against the actual configured length before ordering.
| Accessory kit | Length code | TR15 | SR15 | TR20 | SR20 | TR25 | SR25 | TR30 | SR30 | TR35 | SR35 | TR45 | SR45 | TR55 | TR65 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reinforced end seal + oil box (BN) | S | 55.8 | 66.4 | 73.2 | 83.4 | — | — | — | — | ||||||
| N | 72.4 | 85.3 | 92.6 | 97 | 112.3 | 125 | 144 | — | |||||||
| L | — | — | — | — | — | 159.5 | — | — | |||||||
| E | — | 116.6 | 126 | 148 | 169 | 193.5 | — | — | |||||||
| Reinforced end seal + polymer reservoir (WW, WU) | S | 51.8 | 60.9 | 68.7 | 78.9 | — | — | — | — | ||||||
| N | 68.4 | 79.8 | 87.1 | 92.5 | 107.8 | 120.5 | 136 | — | |||||||
| L | — | — | — | — | — | 151.5 | — | — | |||||||
| E | — | 111.1 | 121.5 | 143.5 | 164.5 | 185.5 | — | — | |||||||
| Reinforced double-end seal + polymer reservoir (WZ) | S | 59.4 | 69.9 | 77.1 | 87.9 | — | — | — | — | ||||||
| N | 76 | 88.8 | 96.1 | 100.9 | 116.8 | 129.5 | 146 | — | |||||||
| L | — | — | — | — | — | 161.5 | — | — | |||||||
| E | — | 120.1 | 129.9 | 152.5 | 173.5 | 195.5 | — | — | |||||||
| Reinforced end + reservoir + metal wiper (DU) | S | 56 | 65.9 | 73.7 | 83.9 | — | — | — | — | ||||||
| N | 72.6 | 84.8 | 92.1 | 97.5 | 112.8 | 125.5 | 141 | — | |||||||
| L | — | — | — | — | — | 156.5 | — | — | |||||||
| E | — | 116.1 | 126.5 | 148.5 | 169.5 | 190.5 | — | — | |||||||
| Reinforced double-end + reservoir + metal wiper (DZ) | S | 63.6 | 74.9 | 82.1 | 92.9 | — | — | — | — | ||||||
| N | 80.2 | 93.8 | 101.1 | 105.9 | 121.8 | 134.5 | 151 | — | |||||||
| L | — | — | — | — | — | 166.5 | — | — | |||||||
| E | — | 125.1 | 134.9 | 157.5 | 178.5 | 200.5 | — | — |
Length codes: S standard, N standard, L long, E extended; “—” means the combination is not offered.
All tables from the MOSIONX 2026 general catalogue, chapter A pages A84–A96 (accessories and seals).